W25q32bv Flash File

| Parameter | Value | |-----------|-------| | | 32 Mbit (4 MByte) | | Page Size | 256 bytes | | Sector Size | 4 KB (smallest erasable unit) | | Block Size (small) | 32 KB | | Block Size (large) | 64 KB | | Max Operating Freq | 104 MHz (SPI) | | Voltage | 2.7V – 3.6V |

The W25Q32BV can be programmed using a variety of software tools and programming languages, including: w25q32bv flash file

If you are looking for a specific file to put onto the chip, it depends on your device: | Parameter | Value | |-----------|-------| | |

| Pin | Name | Function | | :--- | :--- | :--- | | | /CS (Chip Select) | Activates the chip (Active Low). | | 2 | DO (MISO) | Data Output (Master In Slave Out). | | 3 | /WP (Write Protect) | Protects status registers (connect to VCC if unused). | | 4 | GND | Ground. | | 5 | DI (MOSI) | Data Input (Master Out Slave In). | | 6 | CLK | Clock Signal. | | 7 | /HOLD | Pauses serial communication (connect to VCC if unused). | | 8 | VCC | Power Supply (3.3V). | | | 4 | GND | Ground