Fanuc Program Transfer Tool Jun 2026

Program numbers must match the Oxxxx inside the file (e.g., O1234 ). The tool may rename the file to match the O-number.

| Feature | Ethernet/FTP | RS-232 Serial | CF Card/USB | | :--- | :--- | :--- | :--- | | | Excellent (Fast) | Poor (Slow) | Excellent | | Setup Difficulty | High (Requires IT knowledge) | Medium (Cable pinouts) | Low (Plug & Play) | | Cable Length | 100 meters (Cat5) | ~15 meters max | N/A (Portable) | | Best Use Case | Modern shops, High-Speed Machining | Legacy machines, Job Shops | Standalone machines | fanuc program transfer tool

| Step | Action | |------|--------| | 1 | Select your machine from the left panel. | | 2 | Navigate to or Card (destination). | | 3 | From the PC side (right panel), browse to the folder containing your .NC file. | | 4 | Drag-and-drop the file from PC side to CNC side. | | 5 | Confirm overwrite if prompted. | | 6 | On the CNC, press [PROG] → [DIR] to verify the program is loaded. | Program numbers must match the Oxxxx inside the file (e

| Item | Value | |------|-------| | RS-232 Baud | 9600 | | Data bits | 7 | | Stop bits | 2 | | Parity | Even | | Flow control | Xon/Xoff (or Hardware if available) | | Ethernet Port | 21 (FTP) or 8000 (FANUC) | | Default user/pass | FANUC / FANUC | | | 2 | Navigate to or Card (destination)

The software can define and maintain communications with up to 255 individual FANUC CNC controls .

Most common on: Fanuc Series 0i-T, 16i, 18i, and older legacy controls.