F400 __full__ | Spetec Pur

Seal replacement every 200–300 operating hours (depending on filler abrasion). Parts are modular, so downtime is ~30 minutes. However, replacement kits are priced higher than generic alternatives – a common trade-off for precision systems.

The touchscreen interface is intuitive for setup, but calibration requires trained personnel. The cleaning cycle is automated but consumes solvent – fine for continuous production but costly for small batches.

| System | Accuracy | Viscosity Limit | Price (approx.) | |--------|----------|----------------|------------------| | | ±1% | 100,000 mPas | €30k | | Scheugenpflug Dos HP | ±1.5% | 80,000 mPas | €35k | | Graco PD44 | ±2% | 50,000 mPas | €18k | | ViscoTec 2K-Dispenser | ±0.5% | 500,000 mPas | €45k | spetec pur f400

❌

With a viscosity of approximately 350 cP , it is thin enough to penetrate tight hairline cracks that thicker materials cannot reach. The touchscreen interface is intuitive for setup, but

Mechanical injection packers are installed into holes drilled at a 45-degree angle to intercept the crack.

The resin is mixed with 2% to 10% Gen Cat accelerator depending on the desired reaction speed and site temperature. the unit ran 8

It is NSF/ANSI/CAN 61 certified , making it safe for contact with potable drinking water in treatment plants and reservoirs.

Used for water cut-off in diaphragm walls, sheet piling, and secant piles.

Built with stainless steel fluid paths and hardened tool steel in mix head. In one user report from an automotive sensor plant, the unit ran 8,000 hours with only routine seal and tube replacements.