Branchement Interrupteur Volet Roulant Teleco

:

Connect a Normally Open (N.O.) push-button to Terminal 20 .

Brown or Black wire into Terminal 3 (Live IN). Neutral: Blue wire into Terminal 4 (Neutral IN). Earth: Yellow/Green wire into Terminal 2. Switch & Push-Button Inputs branchement interrupteur volet roulant teleco

La marque Teleco propose principalement des systèmes permettant de transformer un moteur de volet roulant filaire classique (à 4 fils) en un système radio pilotable à distance.

Connectez la Phase (L) et le Neutre (N) du secteur sur les bornes d'entrée du récepteur. : Connect a Normally Open (N

The wiring for a (or similar "Telco" branded systems) typically follows standard electrical color-coding for tubular motors. For most Teleco control panels, such as the Teleco Simple , the wiring is broken down into specific terminal blocks for power and motor control. Core Wiring Diagram (Standard 4-Wire Motor)

The wiring for a Teleco roller shutter switch (or motor connected to a Teleco control unit) follows a standard industrial color code. Whether you are connecting a direct manual switch or a Teleco control panel like the Teleco Simple , the primary goal is to manage the phase for the up and down commands while ensuring a common neutral. General Wiring Principles A standard wired shutter motor typically has four wires that must be connected correctly to the switch or control unit: Blue (Neutral): This is the common return for the motor and must be connected to the neutral from your power supply (often via a Wago or terminal block). Green/Yellow (Earth): Connects to the ground terminal of your home’s electrical system for safety. Brown (Direction 1): Often used for the "Down" or "Up" command depending on the motor’s orientation. Black (Direction 2): Used for the opposite command (e.g., if Brown is Up, Black is Down). Wiring a Teleco Control Panel (e.g., Earth: Yellow/Green wire into Terminal 2

When connecting the shutter motor to a Teleco control unit, use the following terminal assignments: Yellow/Green wire (Green/Yellow). Terminal 5 (Open/Up): Black wire. Terminal 6 (Common): Blue wire (Neutral). Terminal 7 (Close/Down): Brown wire.

Le principe de base est d'intercaler le module récepteur entre l'alimentation secteur et le moteur. Le récepteur agit comme un aiguillage : il envoie le courant soit vers la montée, soit vers la descente.