For solid objects (like toys or large clumps of waste) that need to be physically snagged and pulled out rather than pushed through.
If the snake goes all the way in effortlessly but hits nothing, and the toilet still won't flush, your problem isn't the toilet. The clog is likely in your main sewer line clean-out or the vent stack. This requires a much longer sewer snake (often rented) used outside the house, not through the toilet.
Once you feel the snake grab something (or push through), crank it a few more times to break up the blockage. Then slowly pull the cable back while still turning the handle — this helps hook debris. how to use toilet snake
💡 against the porcelain to prevent scratches. Step 3: Insert and Crank Hold the guide tube steady with one hand. Push the handle down while turning it clockwise. Continue cranking as you feed the cable into the drain. Stop if you feel heavy resistance; do not force it. Step 4: Break or Retrieve the Clog Once you hit the blockage, keep cranking clockwise. Push and pull the handle slightly to break up the mass. If the clog feels solid, try to "hook" it with the tip. Step 5: Remove and Test Pull the cable back slowly while still cranking. Flush the toilet to see if it drains properly. Repeat the process if the water still moves slowly. Cleaning Up
Do not flush immediately.
If you've tried vigorous plunging without success, the clog is likely sitting further down in the trap.
3 Ways NOT to Unclog Your Toilet (Unless You Want to Damage It) For solid objects (like toys or large clumps
Place the curved end of the auger into the bowl’s outlet (the larger hole at the bottom). Push gently until the rubber sleeve sits flush against the bowl’s opening.