Hilti Te 72 Specifications Upd Jun 2026

The TE 72 is no longer manufactured. Recommended replacements (modern equivalents):

| Symptom | Likely Cause | Solution | |-----------------------------|--------------------------------------|-----------------------------------| | No hammering (rotates only) | Mode selector not fully engaged | Stop, rotate selector until it clicks | | Reduced impact energy | Worn striker, low grease, or piston seal | Send to Hilti service | | Excessive dust leakage | Worn tool holder O-rings | Replace O-ring kit | | Tool runs hot/smokes | Blocked vents or worn brushes | Clean vents; check/replace brushes | | Bit won’t lock in | Broken TE‑F locking sleeve spring | Service required | hilti te 72 specifications

Oil-bath lubrication for the gearing and hammering mechanism The TE 72 is no longer manufactured

Mechanical slip clutch helps protect the operator if a bit binds in rebar. hilti te 72 specifications