Most InSinkErator models come with a silver, S-shaped hex key called a "Jam-Buster" wrench. If you’ve lost yours, a standard 1/4-inch Allen wrench will work.
Clean the pipe with a flexible brush or coat hanger and reinstall it. Step 4: Reset the Unit
If all else fails, the clog is further down the plumbing. how to unclog an insinkerator garbage disposal
Before you start troubleshooting, make sure to turn off the power to your garbage disposal at the circuit breaker or fuse box. Verify that the disposal is completely powered off before proceeding.
Insert a or long wooden spoon into the disposal opening. Press gently against one of the impeller lugs and rock back and forth to free the jam. Most InSinkErator models come with a silver, S-shaped
Continue until you can spin the wrench in a full 360-degree circle with no resistance. This indicates the jam has been cleared. Step 3: Clear the Drain Pipes
A PDF or photo guide of the InSinkErator Allen wrench location and reset button is recommended for user reference (not included here but easily searchable by model number). Step 4: Reset the Unit If all else
Look for the small on the bottom of the unit.
Since the power is off, use a flashlight to look down the drain.
Turn the power back on at the circuit breaker or fuse box. Run cold water through the disposal and turn it on to see if it will grind and drain properly. If it doesn't, proceed to the next step.