How Do You Unclog An Insinkerator Garbage Disposal File

Understanding why your disposal is stuck helps you choose the right fix:

Regular cleaning: Periodically grind ice cubes and lemon peels to scour the internal components and eliminate odors.

Arthur flipped the switch on the wall. Grrr-grrr-grrr.

Locate the small circular hole in the center of the bottom of the disposal unit (under the sink). Insert the wrench into the hole. Work the wrench back and forth in both directions. how do you unclog an insinkerator garbage disposal

Then, he pressed the red button on the bottom of the unit—the thermal overload protector. It had popped out earlier when the motor jammed. It clicked back in, flush with the casing.

Cold over hot: Use cold water during grinding to keep fats and greases in solid form so they can be chopped up and flushed away.

Arthur turned the water off. The silence that returned was peaceful, not ominous. He wiped his hands on a dish towel, looking at the restored appliance with the respect of a general who had won a hard-fought battle. Understanding why your disposal is stuck helps you

If it doesn't stay in, wait 5 to 10 minutes for the motor to cool down and try again. Step 4: Clearing a Clog in the Pipes

Every InSinkErator comes with a small, silver, L-shaped hex key called a Jam-Buster wrench. If you’ve lost yours, a standard 1/4-inch Allen wrench works perfectly.

The Standing Water: If the motor runs but water won't go down, there is a clog in the discharge pipe or the P-trap. Locate the small circular hole in the center

"The art of the unclog," Arthur whispered to the silent kitchen. "Is not force. It is finesse."

Three. Two. One.

Place a bucket under the P-trap (the U-shaped pipe under the sink). Unscrew the slip nuts and remove the trap. Check for grease buildup or food debris within the pipe. Clean the trap with a bottle brush and hot soapy water. Reassemble the pipes and run hot water to check for leaks. How to Prevent Future Clogs